Liquid Nitrogen Cylinder (5% Hydrogen)

5% Hydrogen balance Liquid Nitrogen Cylinder, supplied in cylinder size T (3.75m3 volume) with a pressure of 200bar. A leak detection solution is used to quickly identify leaks in systems or pipework, helping to save you time on the job. Composed of 5% hydrogen in 95% nitrogen, the hydrogen molecules escape through the smallest of leaks when charged into a system or pipework. This escaping gas can be easily identified with the use of a suitable electronic leak detector. Using a leak detection gas is considered significantly more effective than other methods, such as liquid spray. Being mostly nitrogen, this mixture is non-flammable and safe to use.

• Fill pressure 200bar
• Cylinder contents 3.75m3
• Other cylinder sizes available on request

Before using Liquid Nitrogen Cylinder in any new process or experiment, a thorough material
compatibility and safety study should be carried out. Ensure adequate air ventilation.
Ensure all national and local regulations are observed. Whilst proper care has been
taken in the preparation of this document, no liability for injury or damage resulting
from its use can be accepted. Note: When the Product Name appears in the SDS
header the decimal sign and its position comply with rules for the structure and
drafting of international standards, and is a comma on the line. As an example, 2,000
is two (to three decimal places) and not two thousand, whilst 1.000 is one thousand
and not one (to three decimal places).

Liquid Nitrogen Cylinder National Regulations

Dangerous Substances and Explosive Atmospheres Regulations (DSEAR 2002 No. 2776). Management of Health and Safety at
Work Regulations (1999 No. 3242). The Regulatory Reform (Fire Safety) Order 2005 (2005 No. 1541). Control of Substances
Hazardous to Health Regulations (COSHH, 2002 No. 2677). Provision and Use of Work Equipment Regulations (PUWER, 1998
No. 2306). Personal Protective Equipment Regulations (1992 No. 2966). Control of Major Accident Hazards Regulations
(COMAH, 2015 No. 483). Pressure Systems Safety Regulations (PSSR, 2000 No. 128). Only products that comply with the food
regulations (EC) No. 1333/2008 and (EU) No. 231/2012 and are labelled as such may be used as food additives. This Safety
Data Sheet has been produced to comply with Regulation (EU) 2015/830.